|
| 원래 장소: | 광저우, 중국 |
| 브랜드 이름: | Seric |
| 인증: | CE, ISO |
| 모델 번호: | YCY 시리즈 |
YCY Series Variable Displacement Axial Plunger Pump Fixed Displacement Piston Pump CY Series 108YCY14-1B
The CY series are axial piston pumps, distributing oil via a valve plate with a rotating cylinder block.
Featuring hydrostatic balance structures, they're simple, compact, efficient, long-lasting, lightweight, and have strong self-priming.
Suitable for machine tools, forging, metallurgy, engineering, mining, and other hydraulic systems.
Can be used as hydraulic motors by changing the motor oil distribution plate.
| C | Y | 14 | 1 | B | |||
| Nominal displacements 1.25, 2.5, 5, 10, 16, 25, 32, 40, 63, 80, 100, 160, 250, 400ml/r | M: Fixed displacement S: Manual variable displacement Y: Pressure compensating variable displacement MY: Fixed rated variable displacement B: Electro-hydraulic proportional variable displacement P: Constant-pressure variable displacement C: Engine (servo) variable displacement D: Electric variable displacement |
Pressure grade C represents 31.5MPa | Y: Pump M: Motor |
Cylinder-rotating axial piston pump (motor) | Structure code type 1 | Technical improvement code: B G: 160, 250CY speed-up type at 1500r/min |
Rotation direction (viewed from shaft end): No mark: Forward rotation pump (clockwise) F: Reverse rotation pump (counterclockwise) |
Example: 160YCY14-1G
Representation: A pressure compensating, variable displacement, cylinder rotating, high speed axial piston pump with a displacement of 160 ml/rev and a rated pressure of 31.5MPa. (i.e., the nominal flow rate is 160L/min at 1000r/min)
Recommended Pipe or Pipe Fitting Port Diameter Sizes (Not Interchangeable)
| Model | Inlet (Inner Diameter) | Outlet (Inner Diameter) | Drain Port (Inner Diameter) |
| 1.5CY14-1B | ≥ Φ13 | ≥ Φ10 | ≥ Φ8 |
| 2.5CY14-1B | ≥ Φ13 | ≥ Φ10 | ≥ Φ8 |
| 5CY14-1B | ≥ Φ13 | ≥ Φ13 | ≥ Φ8 |
| 10CY14-1B | ≥ Φ16 | ≥ Φ13 | ≥ Φ10 |
| 16CY14-1B | ≥ Φ16 | ≥ Φ13 | ≥ Φ10 |
| 25CY14-1B | ≥ Φ24 | ≥ Φ24 | ≥ Φ10 |
| 32CY14-1B | ≥ Φ32 | ≥ Φ32 | ≥ Φ15 |
| 40CY14-1B | ≥ Φ32 | ≥ Φ32 | ≥ Φ15 |
| 63CY14-1B | ≥ Φ32 | ≥ Φ32 | ≥ Φ15 |
| 80CY14-1B | ≥ Φ38 | ≥ Φ34 | ≥ Φ15 |
| 100CY14-1B | ≥ Φ38 | ≥ Φ34 | ≥ Φ18 |
| 160CY14-1B | ≥ Φ55 | ≥ Φ42 | ≥ Φ18 |
| 250CY14-1B | ≥ Φ64 | ≥ Φ50 | ≥ Φ20 |
| 400CY14-1B | ≥ Φ66 | ≥ Φ55 | ≥ Φ20 |
Note: The inner diameter of the drain port should not be limited by the size of the threaded fitting and should meet the requirements of this table as much as possible.
