DSG-01 Solenoid Operated Directional Valves
Features
These Solenoid Operated Directional Valves have achieved top-notch performance in high pressure, high flow, and low pressure drop. This is made possible by using a powerful wet-type solenoid and a well-designed flow channel system with five chambers.
High Pressure & High Flow Rate
Compared to our previous product lines, these valves show significant improvements in both pressure and flow.
Low Pressure Drop
These valves have a reduced pressure drop compared to our existing lines, which helps lower the unit's energy consumption.
Compact & Small Mass
Despite their high performance, these valve bodies are compact and lightweight, especially with DC double solenoids.
Shockless type available
Besides the standard high-pressure and high-flow valves, a shockless type is also offered to minimize noise and vibration during spool changeover.
Stable Operation
Thanks to the strong magnetic and spring force of the solenoids, these valves can operate stably even with contaminants.
Specifications
|
Valve Type
|
Model Numbers |
Max. Flow
L /min
(U.S.GPM) |
Max. Operating Pressure MPa (PSI) |
Max. T-Line Back Pres. MPa (PSI) |
Max. Change over Frequency
min-1 (Cycles/Min) |
Approx. Mass
(kg) |
| Standard Type |
DSG-01-3C∗-∗-50 |
63 (16.6) |
31.5 (4570)
{Spool Type 60 Only 25(3630)} |
16 (2320) |
300
{R Type Sol. Only 120} |
2.2 |
| DSG-01-2D2-∗-50 |
2.2 |
| DSG-01-2B∗-∗-50 |
1.6 |
Shock-less Type |
S-DSG-01-3C∗-∗-50 |
40 (10.6) |
16 (2320) |
16 (2320) |
120 |
2.2 |
| S-DSG-01-2B2-∗-50 |
1.6 |
Solenoid Ratings
|
Valve Type
|
Electric Source |
Coil Type |
Frequency
(Hz) |
Voltage (V) |
Current & Power at Rated Voltage |
| Source Rating |
Serviceable Range |
Inrush (A) |
Holding (A) |
Power (W) |
Standard Type
Shock-less Type |
AC |
A100 |
50 |
100 |
80 - 110 |
2.42 |
0.51 |
― |
| 60 |
100 |
90 - 120 |
2.14 |
0.37 |
| 110 |
2.35 |
0.44 |
| A120 |
50 |
120 |
96 - 132 |
2.02 |
0.42 |
| 60 |
108 - 144 |
1.78 |
0.31 |
| A200 |
50 |
200 |
160 - 220 |
1.21 |
0.25 |
| 60 |
200 |
180 - 240 |
1.07 |
0.19 |
| 220 |
1.18 |
0.22 |
| A240 |
50 |
240 |
192 - 264 |
1.01 |
0.21 |
| 60 |
216 - 288 |
0.89 |
0.15 |
DC
(K Series) |
D12 |
― |
12 |
10.8 - 13.2 |
― |
2.45 |
29 |
| D24 |
24 |
21.6 - 26.4 |
1.23 |
| D48 |
48 |
43.2 - 52.8 |
0.61 |
| AC→DC Rectified (R) |
R100 |
50/60 |
100 |
90 - 110 |
― |
0.33 |
29 |
| R200 |
200 |
180 - 220 |
0.16 |
Model Number Designation
|
F-
|
S- |
DSG |
-1 |
-2 |
B |
2 |
| Special Seals |
Shock less Type |
Series Number |
Valve Size |
Number of Valve Positions |
Spool-Spring Arrangement |
Spool Type |
F:
For Phosphate Ester Type Fluids
(Omit if not Required) |
None:
Standard Type |
DSG:
Solenoid Operated Directional Valve |
1 |
3 |
C:
Spring Centered |
2, 3, 4, 40, 60, 9, 10, 12 |
| 2 |
D:
No-Spring Detened |
2 |
B:
Spring Offset |
2, 3, 8 |
S:
Shock-less Type |
3 |
C:
Spring Centered |
2, 4 |
| 2 |
B:
Spring Offset |
2 |
|
A
|
0 |
-C |
-N |
-50 |
-L |
Special Two Position Valve
(Omit if not Required) |
Coil Type |
Manual Override |
Electrical Conduit Connection |
Design Number |
Models with Reverse Mtg. of Solenoid
(Omit if not required) |
| ― |
AC:
A100 A120
A200 A240
DC:
D12 D24 D48
R:
(AC→DC)
R100 R200 |
None:
Manual Override Pin
C :
Push Button and Lock Nut (Option)
|
None:
Terminal Box Type
N:
Plug-in Connector Type
N1:
Plug-in Connector Type with Indicator Light (Option)
|
50 |
― |
| ― |
― |
A
B |
L |
| ― |
DC:
D12 D24 D48
R:
(AC→DC)
R100 R200 |
― |
| ― |
L |
Your message must be between 20-3,000 characters!
